KK-0902-20-30
Operating Voltage = 250/480 Vac 3 PH Wye Operating Current Max= 20 & 30 amps Operating Frequency = 50 - 60Hz Operating Temperature = -20 to +50oC Diel Withstand ( L to Case)= 1500V~for 1 Min. Diel Withstand ( L to L )= 1500Vdc for 1 Min. Leakage current @ 250V~50Hz= 1.8 mA Max Residual Voltage after 5 secs = 34 Volts Max Agency Approvals = UL ( Pending) Ordering Information: 20 Amps 10-32 Threaded Terminals KK-0902-20 30 Amps 10-32 Threaded Terminals KK-0902-30
The 902 filter is a three phase filter designed to operate with computers, motors, power distribution systems or any system using three phase power. This filter is designed to be used on 3 phase wye power systems but can be used in a delta configuration by not connecting to the neutral (N) terminal of the filter. The ground coil is designed to eliminate ground loops caused by inter-system connections. The package features threaded studs for mounting in a "through bulkhead" manner providing the ultimate in RF noise suppression. The filter can also be purchased without the ground coil for use with stand alone systems.
USA EUR
JMK Inc 15 Caldwell Dr. Amherst, NH 03031 JMK Inc Glasgow G13 1DN Scotland UK
PH: 603 886-4100 FX: 603 886-4115 email: info@jmkfilters.com PH: 44-(0) 7785310729 Fax: 44-(0) 141 589 1884
|
